SMOK Koopor Plus 200w TC

IN STOCK NOW

Comes with FREE black silicone sleeve.

Add two VTC5 batteries for only $18 each (usually $20).

The Koopor Plus is one of the most accurate temperature control devices ever made due to the new technology inside. It adopts a dual-circuit drive design, which can effectively control the output while monitoring the temperature of the atomizer. With the new monitoring technology, HFDMR-Ni200 (High-Frequency Dynamic Monitoring Resistance), it can detect atomizer resistance once every 250 microseconds, with a precision of approximately 4000 times per second. It can achieve the highest accuracy of regulating and monitoring heating wire temperatures. The precision can reach 10 degrees Fahrenheit (about 5 degrees Celsius). Constructed from stainless steel with a zinc-alloy coating, it looks modern and feels comfortable. The magnet-held battery cover makes sure that, with a gentle touch, you will simply slide it off and replace the battery in seconds! This mod takes 2 18650 batteries (not included), and provides 200 watts of power! You said you want real temperature control, here is the Koopor Plus.

The Koopor Plus is a solid device, with excellent buttons, and a very easy to use menu system on a bright OLED display. It can be used in wattage mode with any standard wire (nichrome, kanthal, or stainless), or temperature control mode with nickel, titanium, and stainless steel wire. To operate in temperature control mode, select your wire, select temperature control mode, and then choose from 3 settings soft, standard, or hard to fine tune the performance. 

ADJUSTABLE INITIAL RESISTANCE: is a very IMPORTANT new feature for temp control added to the XCube II, Koopor Mini, Koopor Plus, and Treebox. It is designed to ensure your resistance on the load remains the same. Noticing the initial resistance of your atomizer is an important requirement for the temperature- control mods. As temperature sensing coils tend to be sub-ohm, the poor contact problem can make a big error, in a way that is not evident when an atomizer is being used for wattage control only. A 0.01Ω measurement error will lead to about 10°C difference, however, we have all known that a 0.02Ω error can be a common occurrence by simply screw the atomizer tighter or looser. SMOK developed this new feature, in order to help temperature control fans to adjust the initial resistance when an error occurred, and its adjustable range is ±50 mΩ (± 0.05Ω).

DUAL DRIVER OUTPUT: Recently most mods on the market have single driver system, which means that it can either buck or boost the voltage. This device has a dual driver system that works to boost AND buck the voltage to improve the speed and accuracy of regulating and enhance the consistency and taste of every puff

  

Features:

1 - 200 Watts  VW & TC

Temperature Control with Nickel, Titanium, and Stainless Steel 

Temperature Range 200°F-600°F/ 100°C-315°C 

Spring Loaded Center Pin

Includes Free Silicone Case

Stainless Steel 510 Threads

Magnetic Slide Off Back Cover

Accepts 2 x 18650 in a Series (not included)

Micro USB Port (for upgrade only, not for charging)

Large OLED Display  

 

Dimensions: 100.0mm x 59.0mm x 24.5mm  (perfect fit for the TFV4 Tank)

Output Wattage: 6W - 200W

Output Voltage: 0.35V - 8.00W

Resistance Range: 0.08ohm - 3.00ohm (Temp Mode)  0.10ohm - 3.00ohm (Watt Mode)

Standby Current: < 300µA

Maximum Current: it should be less than 50A when the atomizer resistance is 0.1ohm

Connection: 510

Accepts Battery: 2 18650 in Series (not included)

Material: Stainless Steel 

 

Protection:

Over-Heat 

Short Circuit / Current Overload

Over Discharge 

Low Voltage 

 

Includes:

1 Koopor Plus 200W TC Mod

1 Koopor Silicone Case

1 User Manual 

1 Box Packaging with Authenticity Sticker

    Customer Reviews

    Based on 1 review Write a review

    Related Items